On the Analysis of Mooring Systems Using Synthetic Ropes

AuthorsDercksen, A., Hoppe, L.F.E.
Conference/JournalOffshore Technology Conference (OTC), Houston, Texas, USA
DateMay 1, 1994
DOIhttps://doi.org/10.4043/7493-MS
Rapid developments in the field of synthetic fibres have lead to serious alternatives for the traditional catenary mooring systems in several applications. The use of synthetic fibres in mooring systems has received increasing attention, especially for deeper water. However, a design based on these fibres requires modification in the analysis methods.Here the feasibility of mooring systems using a synthetic rope (with Dyneema) compared to a wire rope is analyzed, for a water depth of 800 m. Differences between the systems are elucidated by showing results of a time domain analysis on a turret moored tanker. Different optimization criteria are considered.Generally speaking optimum mooring systems based on synthetic rope are stiffer and impose lower vertical turret loads than a wire rope mooring at increasing water depth. In return for the smaller tanker excursions, the vertical forces at the seabed are considerable for a synthetic mooring.

This paper is copyrighted material and cannot be shared. Due to copyright policy MARIN is not allowed to reproduce and distribute papers written for and presented at the OTC (Offshore Technology Conference), ISOPE (International Ocean and Polar Engineering Conference) and SPE (Society of Petroleum Engineers). You can order these papers through
www.OnePetro.org.

For this specific paper see: www.onepetro.org/conference-paper/OTC-7493-MS.
Tags
stability, seakeeping and ocean engineeringwaves, impacts and hydrostructuralcfd developmentcfd/simulation/desk studiesmeasurements and controldata sciencetime-domain simulationsrenewablesoil and gasinfrastructuremarine systemslife at seamodel testingmooring and offloadingmotionssimulationwavesoffshore engineering