AHMS SOFTWARE

The AHMS software has been developed in cooperation with ABB and WaveForce Technology. This dedicated software is set up and operates within the widely used OCTOPUS framework, which originates from ABB. The AHMS software can easily be tailored for any particular FPSO.
Some features of the software are listed below:
• Detailed Life Time Consumption on a monthly basis
• Continuous comparison with the Life Time Consumption calculated at the design stage
• All data is available in easily readable graphs, tables or percentage bars
• Easily accessible data with user friendly pull-down menus
• Easily selectable period in time to track down detailed information
• Windsea and swell separation and fitting using XWaves from WaveForce Technology
• Incorporation of design software of the floater’s owner or operator for calculation of the fatigue damage
• Independent fatigue calculations based on the Rain Flow Counting method
• Warning for end-users in case of disordered sensors
marin lifetime extension with ahms

AHMS features

• Applicable for new built and existing floater
• Links to the floater’s ICSS, RTDB, loadmaster system, tension mooring system, environmental system and motion (incl. position/offset) system
• Serial and TCP/IP Ethernet communication (MOdBUS, NMEA etc.)
• Results real-time available on secured website
• Alarm and warnings to ICSS
• Interfaces with various monitoring systems including Datawell directional wave rider buoy, Fugro wave scan buoy and Oceanwaves WAMOS system

AHMS specifications

MARIN provides dedicated hull monitoring systems for the maritime and offshore industry. Typical applications of the offshore industry comprise FPSOs, TLPs and semi-submersibles. The advisory hull monitoring systems are provided based on clients’ electrical and instrument specifications. Basic specifications are listed below:
• Sensor type: Long Base Strain Gauges, local strain gauges and Fatigue Damage Sensors
• DNV/GL type approved PC and monitor
• Measurement resolution: 0.2 µε
• Synchronized data between all interfaces
• Adjustable sampling rate
• ATEX and IECEx certified equipment for hazardous areas
• Stainless steel 316L, IP66 and EExe certified junction boxes

AHMS benefits

• Understanding of actual lifetime consumption of floating structures
• Prevention of unexpected failures resulting in loss of production
• Increased safety
• Rational lifetime extension
• Improved design of future units
• Link to Risk Based Inspections

AHMS references

Hull Monitoring Systems have been provided to the Maritime industry by MARIN since 1992. AHMS has been developed within the four years’ Monitas Joint Industry Project which was initiated in 2006. Since then AHMS has been installed onboard of:
• FPSO Glas Dowr, Sable Field (Bluewater)
• FPSO USAN, Nigeria (EXXON MOBIL)
• FPSO CLOV, Angola (TOTAL)
• FPU Moho Nord, Congo (TOTAL)
• FPSO Ichthys, Australia (INPEX)
• FPSO Bonga, Nigeria (SHELL)
• FPSO Aoka Mizu, West of Shetlands (Bluewater)