Digital twin of mooring line tensions
With a detailed numerical model of the FPS mooring system, the mooring line tensions are calculated with the time domain simulation program aNySIM, using the FPS measured wave frequency motions and the measured horizontal GPS positions in the field as input. These measurements are provided by a Motion Reference Unit (MRU) and an accurate RTK DGPS system. Using the measured response of the FPS avoids the uncertainty resulting from a prediction of the hydrodynamic response. The time domain software, running in real time, generates the static and wave frequency mooring line tensions. This provides the operator with valuable data for the validation of the design. The associated fatigue analysis contributes to knowledge on the integrity of the mooring system.
One of the main benefits of the indirect mooring line tension monitoring system is its robustness, since all monitoring equipment is located on the FPS (and not subsea). This equipment is fully accessible and therefore maintainable and replaceable if needed.
The analysis methodology used in the indirect mooring line tension monitoring system provides an important contribution to the development and maintenance of a digital twin of a mooring system. By integrating the design model and in-field measurements, the long-term distribution of forces in the mooring lines are monitored. This generates a detailed knowledge of the status of the mooring system and provides design feedback for the future.