Model Test Experience on Vortex Induced Vibrations of Truss Spars
Author Radboud van Dijk (MARIN), Allan Magee, Joe Gebara (Technip Offshore), Steve Perryman (BP Americas)
Title Model Test Experience on Vortex Induced Vibrations of Truss Spars
Conference/Journal Offshore Technology Conference (OTC), Houston
Paper no. OTC2003-15242
Month May
Year 2003

In order to evaluate the Vortex Induced Vibration (VIV) response of truss Spars and to optimize their strake configuration several model test programs have been carried out at MARIN. The results show that it is possible to optimize the strake design of Spars to obtain minimum VIV-response.
The results of the model tests also suggest that modeling details, such as appendages, can have an influence on the Vortex Induced Vibrations. In order to reliably predict the full-scale VIV-behavior of the prototype Spar these details must therefore be accurately represented on the model.
Furthermore, damping of attached structures such as the truss on a truss Spar can significantly contribute to the reduction of VIV. Loads on such structures have been measured in the model tests.
An important aspect that needs consideration in VIV model testing is effect of model scale on the Reynolds number. Roughness can be added to the hard tank of the Spar to minimize scale effects. The paper discusses possible scale effects and the effect of hull roughness on model test results.
The repeatability of VIV model tests and reliability of these tests in representing the full-scale situation is discussed. The effect of Spar heading with respect to the current direction as well as current speed will be discussed.

   Subject to copyright regulations
Disclaimer | print